Bevel Geardrive Selection Guide
	Input Speed		100 200 300 400 690 850 1150 1750 2400 3000 3600 RPM
	Ratio		1.00/1 --- Reducer Ratios --- 1.20/1 to 1.71/1 1.80/1 to 2.21/1 3.00/1 to 3.25/1 3.78/1 to 4.11/1 4.56/1 to 5.57/1 6.50/1 to 7.33/1 --- Increaser Ratios --- 1/1.20 to 1/1.71 1/1.80 to 1/2.21 1/3.00
	Hollow Bore or Shaft Output		Either Hollow Bore Shaft Output
	Service Factor		1.00 1.25 1.50 1.75 2.00 2.25 2.50 <<< What is it?
	*Select Only From Output Torque OR Input Horsepower (choose minimum required)
	Output Torque*		In Lbs.
	Input Horsepower*		Less than 1/4 1/4 to 1/3 1/3 to 1/2 1/2 to 3/4 3/4 to 1 1 to 1-1/2 1-1/2 to 2 2 to 3 3 to 5 5 to 7-1/2 7-1/2 to 10 10 to 15 15 to 20 20 to 25 25 to 30 30 to 40 40 to 50 50 to 60 60 to 75 75 to 100 100 to 125 125 to 150 150 to 200 200 to 250 250 to 500 500 to 1000 Over 1000
	**You May Also Select From Model Number
	Model Number**